长输管道的试压

长输管道试压是管道施工中的一道重要工序,是对管材和焊接质量的综合检验。从管段划分、试压介质的选择、试验压力的确定等方面对试压工作进行了论述,介绍了国内外先进的施工实例和试压理念,旨在推动实现试压工作的专业化,保证管道长期运行的安全性。     

某汽车转向纵拉杆设计分析

转向纵拉杆是汽车转向传动机构中重要的零部件,通过转向纵拉杆受力分析,对转向纵拉杆的强度、稳定性进行了校核,提供了纵拉杆设计分析的参考.     

甜玉米茎秆强度相关性状的数量性状基因座定位

为选育抗倒伏玉米品种，挖掘甜玉米茎秆强度相关性状的数量性状基因座（quantitative trait locus，QTL），应用复合区间作图法以甜玉米组合T49×T56的F₂为作图群体，通过测定F_2：3家系的茎秆穿刺强度、茎秆抗压强度和茎秆弯折性能3个性状进行相关性状的QTL定位。结果表明，遗传连锁图谱包含153个SSR标记位点，覆盖玉米基因组1 199.1 cM，平均图距7.83 cM。3个性状共检测到10个QTL，其中与茎秆穿刺强度相关的2个QTL位于第3、7染色体上，解释11.81%和22.15%的表型变异，与茎秆抗压强度相关的4个QTL位于第1、3、7染色体上，单个QTL可解释3.68%~33.26%的表型变异，与茎秆弯折性能相关的4个QTL位于第3、6、8染色体上，单个QTL可解释3.55%~18.58%的表型变异。第7染色体检测到1个同时控制茎秆穿刺强度和茎秆抗压强度2个性状的QTL，位于umc1015~umc1987标记区间，分别可解释11.81%和33.26%的表型变异，第3染色体检测到1个同时控制茎秆穿刺强度、茎秆抗压强度、茎秆弯折性能3个性状的QTL，位于umc1400~dupssr23标记区间，分别可解释22.15%、13.27%和18.58%的表型变异。3个茎秆强度性状共同检测到的主效QTL，可在育种实践中用于分子标记辅助选择和抗倒伏玉米品种的选育。     

两种常温固化木材胶粘剂胶接强度分析

对两种木材用常温固化胶粘剂--单宁-甲醛胶粘剂和聚氨酯胶粘剂胶接的速生杨木的静态剪切强度进行了测试与分析.研究结果表明,以速生杨I-72为被胶接对象,自制的双组分型单宁胶压缩剪切强度范围为8.08～8.92MPa,但木破率较低,要满足日本集成材JAS标准中用胶规定,需进一步研究改进.相比较而言,聚氨酯胶粘剂的胶接强度较高,其压缩剪切强度值均在9.8MPa以上,木破率在75%以上,能够满足日本集成材JAS标准中用胶的规定.     

十二烷基硫酸钠对大豆基木材胶黏剂的改性作用

采用10.0g·kg^-1的十二烷基硫酸钠（SDS）改性质量分数为250.0g·kg^-1的大豆粉浆液,制成SDS改性大豆基木材胶黏剂（SF）,运用单因素和正交试验法考察了pH值、反应温度和反应时间对改性SF胶耐水胶合强度的影响。试验结果表明,SDS改性大豆基木材胶黏剂的最佳工艺：pH8,反应温度35℃,反应时间4h。改性后的SF胶Ⅱ类耐水胶合强度为0.70MPa。由红外光谱分析可知,SDS改性使大豆蛋白质分子大量的非极性基团外露,增加了蛋白质分子的疏水性,提高了改性SF胶的耐水胶合强度。图4表3参10     

蛋壳粉少量替代石粉对蛋鸭产蛋性能、蛋品质及钙代谢的影响

【目的】研究蛋壳粉少量替代石粉对蛋鸭产蛋性能、蛋品质和钙代谢的影响。【方法】试验选择80只180日龄的健康山麻鸭蛋鸭,随机分为两组,每组5个重复,每个重复8只蛋鸭。对照组饲喂基础饲粮,试验组在基础饲粮基础上,用2 g蛋壳粉取代饲料中等量的钙添加量。试验为期56 d,试验期间检测蛋鸭产蛋性能、蛋品质、钙沉积量、血液中钙磷含量和钙代谢相关激素水平等指标。【结果】试验组平均蛋重、蛋壳强度和蛋白高度均显著高于对照组,表明添加蛋壳粉能明显提高蛋品质量。试验组蛋壳钙沉积量、血磷含量和血浆甲状旁腺素水平显著高于对照组,试验组血钙含量为4.74(±1.17)μmol/mL,极显著高于对照组的2.79(±1.00)μmol/mL,表明蛋壳粉更有利于钙沉积,能明显提高血液中钙磷含量和甲状旁腺素水平。【结论】蛋壳粉少量替代石粉可促进蛋鸭钙吸收代谢和蛋壳钙沉积,提高平均蛋重,改善蛋品质。     

2种离子固化剂改善黄土抗剪强度和抗渗性的研究

为了探讨CONAID和LUKANG 2种离子固化剂的固土性能及其影响因素,对不同固化剂掺量、养护龄期、压实度和含水率的固化黄土进行了直剪试验和渗透试验.研究结果表明:随着固化荆掺量、养护龄期和压实度增大,2种固化土的内摩擦角和黏聚力呈上升趋势,渗透系数呈下降趋势,且规律比较接近.其中LUKANG固化剂对黄土抗剪强度和抗渗性的改善效果优于CONAID固化荆.建议在施工过程中选用LUKANG固化剂,掺量宜取0.01%.为了达到更好的抗剪和抗渗效果,应尽量延长固化土的养护龄期,增加压实度.     

Differences in swimbladder volume between Baltic and Norwegian spring-spawning herring: Consequences for mean target strength

Fish swimbladders, where present, contribute most to the scattering of sound by fish, as measured by the target strength (TS). The volumes of the swimbladders of two different European stocks of Atlantic herring were compared to consider the effect on estimates of TS. Swimbladder volumes of Baltic and Norwegian spring-spawning herring (Clupea harengus) were measured, together with individual herring fat content. Swimbladder volumes were found to differ significantly between the two herring stocks. Baltic herring have a larger swimbladder volume, which is suggested to be associated with the fish's low fat content, which in turn may be linked to its specific energy budget and the low salinity of the Baltic Sea. A buoyancy model that considered the different salinity conditions and fat proportions was used to evaluate the observed differences in swimbladder volume. The swimbladder volume data were subsequently used to model the mean target strength as a function of depth and growth pattern. Backscattering of the swimbladder was modelled using the modal-series-based deformed-cylinder model (MSB-DCM), describing the swimbladder as a gas-filled, elongated prolate spheroid. The fish body component was modelled as a fluid-filled ellipsoid using the distorted wave Born approximation (DWBA). Modelling results support a different TS-to-size relationship for Baltic herring, with a stronger echo, due to the larger swimbladder. Depth- and length-dependent TS relationships based on the model results are suggested.